学科分类
/ 13
247 个结果
  • 简介:TherelationshipofelectricalpropertiesofMn-dopedBa0.92Ca0.08TiO3PTCR(positivetemperaturecoefficientresistance)ceramicswithtwosinteringscheduleswasdiscussed.UsingTEM(transmissionelectronmicroscope)combinedwithEDS(energydispersiveX-rayspectrometer),theMnionsdistributedatgrainboundarieswereanalyzed.TheresultsshowthatthePTCReffectofMn-dopedPTCRceramicsismoredependentonthesinteringschedulethanthoseofMnfree.ThephenomenonmaybecausedbythevalencestatesvarianceofMnionssegregatedatthegrainboundaries.

  • 标签: 晶粒边界 烧结制度 电性质 势垒 高温陶瓷 掺钡钙钛硝酸锰陶瓷
  • 简介:有5-8nm的尺寸的做Eu的GaOOHnanoparticles被热水的方法作为表面活化剂用钠dodecylbenzenesulfonate(SDBS)准备。做Eu的-Ga2O3和-Ga2O3被退火进一步制作GaOOH:Eu然后由X光检查衍射(XRD)描绘了,传播电子显微镜学(TEM)和光致发光(PL)。TEM结果显示出那monodisperse做Eu3+的GaOOHnanoparticles形式然后变换进通过退火的做Eu3+的-Ga2O3和-Ga2O3GaOOH:在600和900点的Eunanoparticles?????????????????@

  • 标签: 纳米粒子 铕掺杂 氧化镓 水热合成 十二烷基苯磺酸钠 透射电子显微镜
  • 简介:通过基于密度泛函理论的第一性原理计算方法,对MgCu2,Mg2Ca和MgZn2的力学性能和电子结构进行计算,计算所得晶格参数与实验值和文献值相吻合。合金形成热和结合能的计算结果表明,MgCu2具有最强的合金形成能力和结构稳定性。计算了MgCu2,Mg2Ca和MgZn2的弹性常数,推导了体模量、剪切模量、弹性模量和泊松比。结果表明,MgCu2、Mg2Ca和MgZn2均为延性相,MgCu2的刚度最大,MgZn2的塑性最好。通过对结合能和弹性常数的计算,预测了MgCu2、Mg2Ca和MgZn2的熔点。通过对态密度(DOS)、Mulliken布居数、电子占据数和差分电荷密度的计算,分析了MgCu2、Mg2Ca和MgZn2的结构稳定性和力学性能机制。最后,计算和讨论了3种金属间化合物的Debye温度。

  • 标签: 镁合金 MgCu2 Mg2Ca MgZn2 LAVES相 电子结构
  • 简介:ElectrocrystallizationMechanismofTungsteninMoltenKF-B_O_-K_WO_4WenZhenhuanandLiGuoxun文振环,李国勋(GeneralResearchInstiiuteforNo...

  • 标签: ELECTROCRYSTALLIZATION mechanism TUNGSTEN Electrodeposition Mol-ten KF-B2O3-K2WO4
  • 简介:LayeredcathodematerialLiCo1/3Ni1/3Mn1/3O2wassynthesizedbyPechiniprocess,andinvestigatedusingX-raydiffraction(XRD),scanningelectronmicroscopy(SEM)andgalvanostaticcharge/dischargecycling.Thesampleiswell-crystallizedandhasaphase-purea-NaFeO2structure.Theparticlesizesareuniform,anddistributedintherangeof20-200nm.TheinitialdischargecapacityoftheLi/LiCo1/3Ni1/3Mn1/3O2cellwasabout149mAh·g-1whenitwascycledatavoltagerangeof4.5-2.3Vwithaspecificcurrentof0.25mA.Theresultisbetterincomparisonwithsolid-statesolutionmethod.Thesyntheticprocedurewasdiscussed.Threemajorreactions:chelation,esterification,andpolymerizationsuccessivelyoccurred.

  • 标签: LAYERED CATHODE material LiCo1/3Ni1/3Mn1/3O2 PECHINI method
  • 简介:采用固相法制备La2O3与Sb2O3掺杂的钛酸锶钡陶瓷,研究其介电性能及相变特性。通过X射线衍射法分析体系微观结构并利用扫描电镜观察其表面微观形貌。(La,Sb)共掺杂的钛酸锶钡陶瓷具有典型的钙钛矿结构,且随着Sb2O3掺杂量的增多其平均粒径显著减小。La3+离子以及Sb3+离子均占据钙钛矿晶格的A位。La2O3与Sb2O3添加量的改变显著影响钛酸锶钡基陶瓷的介电常数以及介电损耗。La2O3改性的钛酸锶钡陶瓷其四方-立方相变为二级相变,且居里温度随着La2O3掺杂量的增多向低温方向移动。(La,Sb)共掺杂的钛酸锶钡陶瓷则体现为弥散相变,随着Sb2O3含量的增大而偏离居里-外斯定律越显著。由于Sb3+离子对晶格原位离子的取代使得(La,Sb)共掺杂的钛酸锶钡陶瓷的介电常数最大值下的温度亦随着Sb2O3含量的增大而降低。

  • 标签: 钛酸锶钡 LA2O3 SB2O3 钙钛矿 陶瓷 介电性能
  • 简介:Luminescentpolystyrenemicrosphereswereeasilyfabricatedfrompoly(styrene-co-methacrylicacid)andaqueousRE(III)chloridesolution(RE=Eu,Tb)inthepresenceof2,20-bipyridineassecondligand.Thenegativechargesofcarboxylgroupsonthesurfaceofmicrospherescoordinatedwithrareearthionsatfirst,suchascomplexescovalentlylinkedto2,20-bipyridine,resultinginstrongphotoluminescence.Variousmethods,includingtransmissionelectronmicroscope(TEM),scanningelectronmicroscope(SEM),energydispersivespectroscopy(EDS),Fouriertransforminfraredspectroscopy(FT-IR),andfluorescencespectrophotometer,wereusedtocharacterizetheresultantpolystyrenecompositemicrospheres.Thisworkhighlightstheideathatitisfaciletosynthesisluminescentmicrospheresbysurface-modifiedmethoddirectly.

  • 标签: LUMINESCENT Polystyrene TERBIUM EUROPIUM 2 2’-bipy
  • 简介:TheeffectofyttriaonthesolidreactionmechanismofaCaHPO4·2H2O+CaCO3systematdifferenttemperatureswasexperimentallystud-ied.Thesampleswithandwithoutyttriaweresubjectedtothermogravimetric/differentialscanningcalorimetrymeasurement.ThesampleswereheattreatedatthetemperaturescorrespondingtothepeaksontheDSCspectra,andtheresultedphasecompositionswereidentifiedbyX-raydiffraction.Thetransformationmechanismwasdeducedbycomparingthephasesobtainedatdifferenttemperatures.Theresultsshowthatthetransformationsatbelow1073Karenotaffectedbyyttria,butallthoseatabove1073Karecompletelyaltered.Theformationtem-peratureofhydroxyapatitedecreasesby134K,andthedecompositiontemperatureincreasesby38K.ThepolymorphoustransformationofCa3(PO4)2fromβphasetoαphaseincreasesby47K.Thethermodynamicpropertiesofthetransformationsatabove1073Karealsomodi-fiedbytheadditionofyttria;thatis,theendothermalpeaksaresubstitutedbyexothermalpeaks.

  • 标签: 生物陶瓷 固体反作用力机制 X射线衍射 热分析 氧化钇
  • 简介:霍尔-埃鲁特铝电解槽需要一种新型的耐火材料来取代现有的凝固电解质构筑的炉帮。用两步烧结法制备的镁铝尖晶石作为潜在的候选材料,采用阿基米德排水法和扫描电镜研究镁铝尖晶石的致密化和晶粒长大。将所制备的试样在Na3AlF6-AlF3-CaF2-Al2O3电解质中腐蚀以评价其耐蚀性能。结果表明,用两步烧结法可制备高致密度(99.2%)和均匀显微结构的镁铝尖晶石。镁铝尖晶石对Na3AlF6-AlF3-CaF2-Al2O3电解质的腐蚀机理主要是镁铝尖晶石的溶解、氧化铝的形成和氟化物的扩散。两步烧结法制备的镁铝尖晶石具有良好的耐Na3AlF6-AlF3-CaF2-Al2O3电解质腐蚀性能。

  • 标签: 镁铝尖晶石 烧结 铝电解 耐腐蚀性能
  • 简介:采用真空熔炼方法制备Al2Ca金属间化合物并将其添加到AZ31镁合金中,研究其添加量对铸态AZ31镁合金晶粒细化的影响,同时讨论其晶粒细化机理。结果表明:添加1.1%Al2Ca(质量分数)可使得铸态AZ31镁合金晶粒尺寸从354μm细化到198μm,且经Al2Ca细化后,合金晶粒的热稳定性良好。晶粒细化的机理是溶质效应和Al2Ca的异质形核协同作用。

  • 标签: AZ31镁合金 Al2Ca 晶粒细化 机理
  • 简介:BasedonthetechniqueforpreparingLaCl3viadirectpyrolysisofrareearthchloridesolution,ajetpyrolysisreactorwasdesignedandtheintra-reactortemperatureandchemicalreactionswerenumericallysimulatedusingcomputationalfluiddynamics(CFD)technique.Theresultsshowthattheflowratevariationatthefuelinletdoesnotlargelyaffectthetemperatureinthereactor,whiletheincreaseinexternalpressureatthematerialinletrapidlydecreasestheaveragetemperature,Venturitemperature,andoutlettemperature.TheCH4andO2insidethereactorarecombustedcompletely,andwhenthematerialinletpressureis\90Pa,theLaCl3isfullypyrogenated.ThecontentsofCO2,La2O3,andHClfluctuateneartheVenturitubeandfinallystabilize.La2O3contentattheoutletisinatop-to-bottomgradient.

  • 标签: Jet-flow PYROLYSIS Chemical REACTION NUMERICAL SIM
  • 简介:Thecorrosionbehaviorandanti-corrosionmechanismoftheZn-Ni-Al2O3compositecoatingwereinvestigatedbySEM,EDSandXPS.TheresultsindicatethatthecorrosiontypeoftheZn-Ni-Al2O3coatingsinneutral5wt.%NaClsolutionisuniformcorrosion.ThepresenceofcompactanduniformlydispersednanoaluminaparticlessubstantiallyinhibitsthecorrosionofZn-Ni-Al2O3compositecoatings.Intheinitialcorrosionstage,thecorrosiveproductsofZn-NimatrixformacompactZnCl2·4Zn(OH)2layer.Withthedevelopmentofcorrosion,somenanoaluminaparticlesareembeddedandformaNienrichmentlayer.InNienrichmentlayer,NipresentsasNiandNiO.

  • 标签:
  • 简介:利用高频辅助激光熔覆技术在镍基合金上制备Al2O3-13%TiO2(质量分数)陶瓷涂层。采用SEM、XRD和EDS等方法分析陶瓷涂层的微观结构和陶瓷层与粘结层之间的结合界面。结果表明:陶瓷层出现了完全熔化区和液相烧结区双层结构,其中,完全熔化区颗粒充分烧结长大,而液相烧结区则出现了三维网状结构,该三维网状结构由熔化的TiO2相包裹Al2O3颗粒形成。通过激光熔覆作用下的粉末熔化和扁平化行为解释双层结构形成机理。同时,在陶瓷层与粘结层的结合界面上发现具有尖晶石结构的NiAl2O4和针状结构的Cr2O3,证明在激光熔覆过程中发生的化学反应可以有效增加陶瓷层与粘结层的结合强度。

  • 标签: 陶瓷涂层 镍基合金 激光熔覆 Al2O3-TiO2 高频辅助
  • 简介:ScanningElectronMicroscopyStudiesofYBa_Cu_O_(7-δ)SuperconductorsShaWei(沙维)(DepartmentofCivilEngineering,TheQueen′sUniversit...

  • 标签: SUPERCONDUCTORS Thin film Ion IMPLANTATION Scanning
  • 简介:采用反应合成方法制备孔隙度为54.3%的高纯Ti3SiC2多孔材料,并研究其在400~1000°C下空气中的氧化行为。采用热重-差热分析法、扫描电镜、X射线衍射技术、能谱仪、拉曼光谱、BET比表面分析法和孔结构测试等研究Ti3SiC2多孔材料在氧化前后的氧化动力学、物相组成、微观形貌以及孔结构参数演变。结果表明:形成不同晶型TiO2氧化产物是影响Ti3SiC2多孔材料抗氧化性及孔结构稳定性的主要因素。由于氧化产物体积应力以及热应力的存在,因此,在400~1000°C试验过程中试样表面均出现开裂现象。其中,在400~600°C下形成的锐钛矿型TiO2会导致Ti3SiC2晶粒出现严重开裂,并引发快速氧化以及孔径和透气度的异常减小。600°C以上在氧化过程中主要形成金红石型TiO2,开裂现象得以缓解,但是氧化膜的外延生长大幅降低了Ti3SiC2多孔材料孔隙的连通性。

  • 标签: TI3SIC2 TIO2 多孔材料 反应合成 氧化
  • 简介:AseriesofnovelAgCl/Ag2CO3heterostructuredphotocatalystswithdifferentAgClcontents(5wt%,10wt%,20wt%,and30wt%)werepreparedbyfacilecoprecipitationmethodatroomtemperature.TheresultingproductswerecharacterizedbypowderX-raydiffraction(XRD),scanningelectronmicroscopy(SEM),X-rayphotoelectronspectroscopy(XPS),andultraviolet–visiblediffusereflectancespectroscopy(UV–VisDRS),respectively.Thephotocatalyticactivityofthesampleswasevaluatedbyphotocatalyticdegradationofmethylorange(MO)underUVlightirradiation.WiththeoptimalAgClcontentof20wt%,theAgCl/Ag2CO3compositeexhibitsthegreatestenhancementinphotocatalyticdegradationefficiency.Itsfirst-orderreactionrateconstant(0.67h-1)is5.2timesfasterthanthatofAg2CO3(0.13h-1),and16.8timesfasterthanthatofAgCl(0.04h-1).TheformationofAgCl/Ag2CO3heterostructurecouldeffectivelysuppresstherecombinationofthephoto-generatedelectronandhole,resultinginanincreaseinphotocatalyticactivity.

  • 标签: 异质结构 光催化剂 氯化银 光催化性能 光催化降解效率 X射线光电子能谱
  • 简介:结构和绝缘的性质(Pb,Sr)有不同Pb和Sr内容的Nb2O6-NaNbO3-SiO2眼镜陶艺被调查。没有Sr替换的眼镜陶艺的XRD模式与Sr替换与那不同,它在后者显示斜方晶的阶段的存在。,TEM明亮的地观察与Sr为样品显示出nanosized微观结构,与分开的使结晶的乐队一起的典型最容易溶解的微观结构在玻璃矩阵被发现。当到Pb的Sr的臼齿的比率是4时,样品的绝缘的性质测量显示绝缘的常数,绝缘的损失,DC地和绝缘的常数的温度依赖的明显的改进?6。

  • 标签: SIO2玻璃 陶瓷复合材料 纳米微结构 介电性能 PB SR
  • 简介:EmployingLi2CO3,NiO,Co3O4,andMnCO3powdersasstartingmaterials,Li[Ni1/3Co1/3Mn1/3]O2wassynthesizedbysolid-statereactionmethod.Variousgrindingaidswereappliedduringmillinginordertooptimizethesynthesisprocess.Aftersuccessiveheattreatmentsat650and950℃,thepreparedpowderswerecharacterizedbyX-raydiffraction(XRD)analysis,scanningelectronmicroscopy,andtransmissionelectronmicroscopy.Thepowderspreparedbyaddingsalt(NaCl)asgrindingaidexhibitaclearR3mlayerstructure.ThepowdersbyothergrindingaidslikeheptaneshowsomeimpuritypeaksintheXRDpattern.Theformerpowdersshowauniformparticlesizedistributionoflessthan1μmaveragesizewhilethelattershowsawidedistributionrangingfrom1to10μm.EnergydispersiveX-ray(EDX)analysissshowthattheratioofNi,Co,andMncontentinthepowderisapproximately1/3,1/3,and1/3,respecively.TheEDXdataindicatenoincorporationofsodiumorchlorineintothepowders.Charge-dischargetestsgaveaninitialdischargecapacityof160mAh·g-1forthepowderswithNaCladditionwhile70mAh·g-1forthepowderswithheptane.

  • 标签: LITHIUM ion battery CATHODE materials LAYERED
  • 简介:HotcompressionbehaviorofTiC–Al2O3/AlcompositeswasstudiedusingtheGleeble-1500systematatemperaturerangeof300–550°Candatstrainraterangeof0.01–10.00s-1.TheassociatedstructuralchangeswerestudiedbyTEMobservations.Theresultsshowthatstressleveldecreaseswithdeformationtemperatureincreasingandstrainratedecreasing,whichcanberepresentedbyaZener–Hollomonparameterinanexponent-typeequationwithhotdeformationactivationenergyQof172.56kJ·mol-1.Dynamicrecoveryoccurseasilywhenstrainratesarelessthan10.00s-1.Dynamicrecrystallizationcanoccuratstrainrateof10.00s-1.

  • 标签: TiC–Al2O3/Al COMPOSITES HOT DEFORMATION Flow stres