首页 > 《等离子体科学与技术：英文版》 > 2018年1期 > Study on the RF inductively coupled plasma spheroidization of refractory W and W-Ta alloy powders

Study on the RF inductively coupled plasma spheroidization of refractory W and W-Ta alloy powders

在线阅读下载PDF 导出详情

摘要未填写

DOI pd513yk2j7/1800623

作者

机构地区不详

出处《等离子体科学与技术：英文版》 2018年1期

关键词

分类 [核科学技术][核技术及应用]

出版日期 2018年01月11日（中国期刊网平台首次上网日期，不代表论文的发表时间）

相关文献

1JIAChengchang LIZhigang HEYuntao QUXuanhui. Spark plasma sintering on mechanically activated W-Cu powders.金属材料,2004-03.
2喻明浩;Yusuke TAKAHASHI;Hisashi KIHARA;Ken-ichi ABE;Kazuhiko YAMADA;Takashi ABE. Numerical Investigation of Flow Fields in Inductively Coupled Plasma Wind Tunnels.核技术及应用,2014-10.
3兰彦;尤庆亮;程诚;张素贞;倪国华;M. NAGATSU;孟月东. Graft Polymerization of Acrylic Acid on a Polytetrafluoroethylene Panel by an Inductively Coupled Plasma.核技术及应用,2011-01.
4毕振华;洪义;雷光玖;王帅;王友年;刘东平. Influence of a centered dielectric tube on inductively coupled plasma source： Chamber structures and plasma characteristics.物理,2017-07.
5赵书霞;丰曌. Gas flow characteristics of argon inductively coupled plasma and advections of plasma species under incompressible and compressible flows.物理,2018-12.
6程嘉;朱煜;季林红. Modeling Approach and Analysis of the Structural Parameters of an Inductively Coupled Plasma Etcher Based on a Regression Orthogonal Design.核技术及应用,2012-12.
7李兴钰1,2，李小平1,2，张亚军1,2，拓万勇1，刘磊1，马晶1. Ta10W材料3D打印工艺研究.,2022-12.
8LIU Shulon;YU Kan;SHEN Qiang;LI Mcijuan;CHEN Wenshu;LUO Guoqiang;ZHANG Lianmcng. Fabrication of W@Cu Composite Powders by Direct Electroless Plating Using a Dripping Method.材料科学与工程,2013-04.
9王金晓;秦艳丽;闫恒庆;高平奇;栗军帅;尹旻;贺德衍. Columnar growth of crystalline silicon films on aluminium-coated glass by inductively coupled plasma CVD at room temperature.物理,2009-02.
10雷阿利;冯拉俊;王兆华;张静. Microstructure characteristics of coating with amorphous phases prepared from Fe-based alloy powders by plasma spray.焊接,2013-04.

来源期刊

等离子体科学与技术：英文版

相关推荐

同分类资源更多

相关关键词

返回顶部